1. Connect via serial to console port (Use these terminal settings-9600 baud rate/No parity/8 data bits/1 stop bit) 2. Turn off the switch, and then turn the switch back on Wait a few minutes after the power reset, if necessary, for the switch to present the first password prompt. Important: After the presentation of the ...
Connect ASA with Console cable normaly blue color cable. Open Terminal Program. Windows XP, click Start, Programs, Accessories, Communications, Hyperterminal, create a connection on Com1 using the terminal settings: Windows 7: use Putty, install it, then make a new connection. Select the radio Type: Serial, then click Serial on the left and use these settings: ...
